HONPLAYContact
Three-person saucer turntable HQY01301, main view
Swivel chairs

Three-person saucer turntable HQY01301

Three-person saucer turntable HQY01301 features body and seats and central section.

Model
HQY01301
Product code
01301
Diameter
1400 mm / 140 cm
Total height
550 mm / 55 cm
Reference size
Diameter 140 × 55 cm
Age group
Not specified
Nominal configuration count
Nominal configuration count; not rated capacity
Free fall
Not specified
Safety zone
Not specified
Nominal configuration count
3
TDS revision
C

Reference HQY01301 when discussing your project.

Product information

Product Snapshot

ProductThree-person saucer turntable HQY01301
CategorySwivel chairs
Diameter1400 mm / 140 cm
Total height550 mm / 55 cm
Reference sizeDiameter 140 × 55 cm
Materials
Body and seatsLLDPE or HDPE
Central sectionPE panel
Support mechanismStainless steel or metal
Connecting fasteners304 stainless steel

Key Details

BrandHonPlay
SKUHQY01301
Model number01301

Product overview

The HQY01301 is a saucer turntable designed for rotating activities. Classified under swivel chairs, this model features a reference size of 140 cm in diameter and 55 cm in total height. These dimensions provide a starting point for understanding the physical scale of the equipment within a planned recreation area.

The design incorporates a central section and a specific seating arrangement. It includes a nominal configuration count of three seats. This count describes the physical layout of the body and seats, providing distinct places for users to position themselves, rather than establishing a rated simultaneous capacity or maximum load limit.

The body and seats are specified as LLDPE or HDPE, while the central section is a PE panel. The support mechanism is specified as stainless steel or metal, and the connecting fasteners as 304 stainless steel. The hidden bearing and anchorage details remain undocumented.

Site Suitability

Circulation and Access

When placing this swivel chair, keep main pedestrian circulation paths away from the rotating activity. Use the 1400 mm diameter as a baseline for the equipment's physical size, and request the manufacturer's required clearances to ensure users can approach and leave the turntable without obstructing other site traffic.

Age Group Coordination

The intended age group is not specified. Before selecting this model for a school or community park, request the recommended age range and operating requirements from the manufacturer. Review the seating configuration and the 550 mm total height as part of that model-specific confirmation.

Play Value

Rotating Activity

The turntable provides a rotating activity within a defined seating layout. For supervised sessions, plan an orderly sequence of approach, a turn on the equipment and departure before another turn begins. Use the manufacturer's confirmed operating instructions to organize these steps and keep passing traffic clear of the activity.

Organized Seating

The body features a three-seat configuration. These distinct seating areas help organize how users interact with the turntable, providing specific contact points during the rotating activity. This arrangement allows participants to choose their position relative to the central section.

Engineering Highlights

Component Materials

The turntable's visible structure relies on plastic components. The body and seats are specified as either LLDPE or HDPE, while the central section is formed from a PE panel. These materials define the contact surfaces for the seating configuration.

Support and Fasteners

The structural support mechanism is fabricated from stainless steel or metal, and the connecting fasteners are specified as 304 stainless steel. The specific design of the hidden bearing and the anchorage method are not documented in the standard specifications.

Safety & Installation

Installation planning

Clearances and Safety Zone

The required safety zone and free fall height are not specified for this model. Planners must obtain the exact installation drawing from the manufacturer to determine the necessary safety surfacing area and clearances required around the rotating equipment.

Anchorage and Handover

Because the hidden anchorage and bearing details are not documented, you must request the specific ground support instructions prior to installation. Agree on the inspection procedures and maintenance intervals for the support mechanism and fasteners before the final project handover.

Components & materials

ComponentMaterial and detail
Body and seatsLLDPE or HDPESeating configuration; seat count is distinct from a load rating.
Central sectionPE panel
Support mechanismStainless steel or metalHidden bearing and anchorage are not documented and not reconstructed
Connecting fasteners304 stainless steel

Configuration & specification notes

Seat count describes the configuration, not a rated capacity or load limit.

Technical data sheet

Download the technical data sheet for HQY01301 for product specifications and component details.

Open HQY01301 TDS (PDF · 0.39 MB)

Questions & answers

What are the dimensions of this turntable?

The unit has a diameter of 1400 mm (140 cm) and a total height of 550 mm (55 cm). Use this reference size for initial scale comparison when planning your layout.

How many users can use the equipment at once?

The turntable features a nominal configuration count of 3 seats. This number describes the physical seating arrangement on the body, not a rated simultaneous capacity or a tested load limit.

What materials are used for the seating and central areas?

The body and seats are manufactured from either LLDPE or HDPE. The central section is made from a PE panel.

Is the safety zone size provided?

No, the safety zone and free fall height are not specified. You must request the final installation drawing to determine the required clearances and surfacing area around the rotating activity.

What age group is this model intended for?

The age group is not specified. Contact the manufacturer to confirm the intended age range before selecting this model, ensuring the seating configuration and 550 mm height suit your project's users.

How is the support mechanism installed?

The support mechanism is made of stainless steel or metal, but the hidden bearing and anchorage details are not documented. Request the exact ground fixing requirements and installation instructions prior to preparing the site.

Product comparison

ProductKnown specifications
Three-person saucer turntable HQY01301
Reference size: Diameter 140 × 55 cm
Overhead rotating ring FY310-09
Reference dimensions: 246 × 246 × 200 cm
Three-rail roundabout FY310-10
Reference dimensions: diameter 125*94 cm

More in Swivel chairs